Call Waiting - Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features

Call Waiting

Call Waiting
At a Glance
Users Affected
Reports Affected
Modes
Telephones
Programming Codes
On
Off
Feature Code
MLX Display Labels
Factory Setting
Description
When an extension is programmed with Call Waiting, you hear a tone when you
are off-hook and another call arrives. For an inside call, you hear one beep; for an
outside call, you hear two beeps. With an MLX display telephone, you also see
Call Waiting on the display. The caller hears a special ringback to indicate that
the extension is busy and that the call-waiting tone has been sent.
NOTE:
The Call Waiting feature is supplied by the MERLIN LEGEND
Communications System and is not the same as the Call Waiting supplied
by the central office.
A multiline telephone is considered busy when no SA or ICOM buttons are
available for incoming calls and, if Coverage is programmed, all coverage points
are busy.
When the called party frees an SA or ICOM button and there is a call waiting, the
caller hears dequeuing tone, and the waiting call appears on the free SA or ICOM
button of the called party.
A single-line telephone is considered busy when a call rings on the telephone or
the user lifts the handset and, if Coverage is programmed, all coverage points are
busy.
Telephone users, DLC operators
Extension Information
All
All except QCC
*11
**11
87 (for call-waiting pickup)
CallWaiting,On [CWait,On]
CallWaiting,Off [CWait,Off]
Off
Issue 1
April 1999
110