Call Waiting - Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features

Call Waiting

Call Waiting
At a Glance
Users Affected
Reports Affected
Modes
Telephones
Programming Codes
On
Off
Feature Code
MLX Display Labels
Factory Setting
Description
When an extension is programmed with Call Waiting, a user hears a tone when he
or she is off hook and another call arrives. For an inside call, the user hears one
beep; for an outside call, the user hears two beeps. MLX display telephone users
Ã
also see
indicate that the extension is busy and that the call-waiting tone has been sent.
A multiline telephone is considered busy when no SA or ICOM buttons are
available for incoming calls and, if Coverage is programmed, all coverage points
are busy.
When the called party frees an SA or ICOM button and there is a call waiting, the
caller hears dequeuing tone, and the waiting call appears on the free SA or ICOM
button of the called party.
A single-line telephone is considered busy when a call rings on the telephone or
the user lifts the handset and, if Coverage is programmed, all coverage points are
busy.
Each extension can be programmed with Call Waiting on or off. The default is Call
Waiting off.
The user hears a call-waiting tone for the following types of calls that ring on an
SA or ICOM button:
An inside call
A call received on a DID trunk
A call from a remote access user
Telephone users, DLC operators
Extension Information
All
All except QCC
à (for call-waiting pickup)
Off
on the display. The caller hears a special ringback to
3
3
3
Issue 1
August 1998
Page 98