Connecting Contact Closure, Call Reporting (Smdr), Paging, And Music-On-Hold Devices - Lucent Technologies PARTNER Advanced Communications System Installation Manual

Connecting Contact Closure,
Call Reporting (SMDR),
Paging, and Music-On-Hold Devices
Only steps for connection to the processor module are provided here. See the manufacturer s instructions for more
information about installing and using these devices.
Contact Closure Adjunct
1
Insert the modular plug into the Contact Closure jack,
the first jack on the PARTNER ACS processor module.
2
Route the cord as you did for the line and extension
cords, then connect the other end of the cord to the
jack in the Contact Closure Adjunct.
3
Have a qualified electrician wire the Contact Closure
device or devices to the wiring receptacles in the other
end of the Contact Closure Adjunct. See the
information shipped with the Contact Closure Adjunct
for wiring instructions.
Call Reporting (SMDR) Printer
1
Insert one end of a D8W modular cord into the SMDR
jack, the second jack on the PARTNER ACS processor
module.
2
Plug the other end of the cord into a 355A adapter,
then plug the adapter into the printer s RS-232C serial
port.
26
Installation Procedures
Contact
Closure Jack
Contact
Closure
Adjunct
00
NE R 30
jun ct
PA RT ur e Ad
ct Cl os
Co nta
SMDR Jack
Call Accounting
Terminal Printer
(optional)