Uniform Dial Plan Features - Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features

Uniform Dial Plan Features

Uniform Dial Plan Features
At a Glance
Users Affected
Reports Affected
Modes
Telephones
System Programming
All
Non-Local Dial Plan, Extension Information
Hybrid/PBX
All
Assign extension number ranges for non-local dial plan
extensions:
SysRenumber
extension in range
in range
Enter
range EnterDial no. of pattern for extension range
Enter Exit
Delete extension number ranges for non-local dial plan
extensions:
SysRenumber
extension in range
Exit
Specify UDP routes:
Tables UDP Routing
Dial route no.
code
Enter
Specify FRLs for UDP routes:
Tables UDP Routing
Dial route no.
Enter Exit
Specify how many dialed digits should be absorbed (not sent
over the trunk) by the system when a UDP call to a non-local
extension is made on an identified UDP route:
Tables UDP Routing
Dial route no.
number of absorption digits
Exit Exit
Specify other (extra) digits that must be added by the system
to the beginning of the dialed digits when calls are placed on
an identified UDP route:
Tables UDP Routing
Dial route no.
digits to add
Enter
Dial no. of first
NonLocal UDP
Dial no. of last extension
Enter
Dial no. of dial digits in extension
Exit Exit
Dial no. of first
NonLocal UDP
Enter DelRange
Dial pattern no.
Dial pool dial-out
Enter Pool
Exit Exit Exit
Dial pattern no.
Dial restriction level
Enter FRL
Exit Exit Exit
Dial pattern no.
Press Drop
Enter Absorb
Enter
Dial pattern no.
Press Drop
Enter Digits
Exit Exit
Issue 1
April 1999
741
Exit
Enter
Exit
Enter
Enter
Dial
Exit Exit
Enter
Dial
Exit Exit