AT&T MERLIN LEGEND Release 3.0 System Programming And Maintenance Manual page 121

Glossary
SMDR printer
Software Defined
Network
special character
SPM
square key
station
station jack
Station Message Detail
Recording
Supplemental Alert
Adapter
switchhook flash
synchronous data
transmission
System Access buttons
Printer used to produce SMDR reports.
Connected to the system via an RS-232 jack on
the processor module.
See SDN.
Pause, Stop, or End-of-Dialing signal in a
programmed dialing sequence such as an
Auto Dial or Personal Speed Dial number.
(System Programming and Maintenance) DOS-
or UNIX system-based application for
programming and maintaining the system.
Configuration in Key mode operation in which
all outside lines appear on all telephones.
See extension.
See extension jack.
See SMDR.
See SAA.
Momentary (320 ms to 1
signal used as a control
directed either to the control unit or to a host
switch outside the system. Also called "Recall"
or "timed flash."
Method of transmitting a continuous digital data
stream in which the transmission of each binary
bit is synchronized with a master clock. See
also asynchronous data transmission.
See SA buttons.
System Programming and Maintenance (SPM) GL-31
second) on-hook
signal. May be