AT&T MERLIN LEGEND Release 3.1 Maintenance And Troubleshooting Manual page 46

Maintenance Strategy
Frigid Start (System Erase)
!
CAUTION:
All system programming is erased. When you perform a frigid start
(System Erase), all calls are dropped, and the system configuration
information is erased. All system memory must be reinitialized, including
system programming. Then the entire system must be rebooted.
To perform a frigid start, select
Console Procedure
PC Procedure
Considerations
select
twice.
After a System Erase, the default printer is the PC printer, not the
Station Message Detail Recording (SMDR) printer. If you want on-site
printouts from the SMDR printer, make sure you change the option.
To change the printer option, see System Programming and
Maintenance (SPM) for information on the Print Opts option on the SPM
Main Menu.
For more information on System Erase, see "Processor Problems" in
Chapter 4.
1–22
Introduction
Menu
button)
6 1 Type
is not displayed on the MLX-20L status display. To
, press the left button on Line 5 of the display
as follows:
Dial
(Line 5 of the display, left
2 3 3 2