AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 74

Programming with SPM
Step
10
I
11
Language
A language attribute in the SPM configuration file \sprn\ams.cfg (DOS
version) or /usr/ams/ams.Cfg (UNlX System version) specifies whether SPM
menus, pop-up windows, and other messages are presented in English, French,
or Spanish. A second language selection option affects messages from the
control unit to SPM, and controls the 7 x 24 console simulation window for the
duration of the session. These two language options operate independently of
each other.
The following discussion refers to the language specified in the SPM
configuration file as the PC language and the language used by the control unit
as the console window language.
PC Language
During installation of SPM, the user selects a language, and that selection is
recorded in the SPM configuration file. Any time thereafter, SPM can be started
with the -l option to specify a different language, using one of the following
command lines:
spm -l english
spm -l french
spm -l spanish
Use of the -l option changes the language attribute in the ams.cfg file. The
language specified becomes the new PC language, used whenever SPM is
started without the -l option. (Note that the option is a lowercase letter L, not
the number 1.)
2-24 Using SPM
Display Instructions
This screen informs you that the
conversion is in progress.
When the conversion is complete, the
following screen appears.
After you press a key, you see the SPM
Main Menu.