AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 447

Programming Procedures
Extended Call Completion
Use this procedure to specify one of two basic options for QCC operator
positions with a DSS only:
Automatic completion - allows one touch call transfer; that is, calls are
transferred by touching only an extension button on the DSS. The
operator does not have to press the Release button.
Manual completion - QCC operators must press the Release button to
extend a call using a DSS.
This option cannot be programmed for individual QCC operator positions; the
setting applies to all QCC operator positions.
Entering Programming
Console: Select Menu
PC/SPM: Type SPM
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
[F5]
press on the PC before saving your entry or menu selection.
Summary: Extended Call Completion
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
3-356 Extended Call Completion
Sys Program
Exit
[F1]
press any key
System manager
Hybrid/PBX
Not required
Form 6a, Optional Operator Features
Automatic Extended Completion
Automatic, Manual
No
No
Operator Queued Call
Select automatic or manual complete
E x i t
[F3] [F2] [F9]
[F10] [F5]
complete
[F5]
ExtndComplt
Enter
Select automatic or manual
[F5]
Exit