AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 138

Programming Procedures
Display/Instructions
S t e p
If a DSS is attached, do the
5a
following:
Check red LEDs for feature
status.
red LED indicates the
The
following:
on = telephone is currently
assigned as a QCC
position
flashing = telephone can be
assigned as a QCC
position
off = telephone cannot be
assigned as a QCC
position
If a DSS is not attached, do the
5b
following:
1. Specify the QCC
operator position you
want to assign or remove
in one of the following
ways:
Extension number
Slot and port number
Logical ID number
2. To assignor remove the
displayed extension
number as a QCC
operator
6 Indicate that you have finished
entering all positions.
Session is terminated, the
system restarts. Re-enter
system programming to
continue.
On the console
Toggle the LED On/Off,
as required.
Dial [nnnn].
Dial [sspp].
Dial #[nnn].
Select Enter
or Delete.
Select StoreAll.
QCC System Operator Positions
On the PC
Type [nnnn].
Type [sspp].
Type #[nnn].
[ F10 ] [ F8 ]
Press or
[ F3 ]
Press
3-47