Integrated Peripherals - ECS X48T-A Manual

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
SATA Configuration
Onboard SATA Mode
Onboard AUDIO Function
Intel GLAN Function
Intel GLAN Boot ROM
Realtek GLAN Function
Realtek GLAN Boot ROM
Serial Port1 Address
Onboard IR
USB Functions
Legacy USB Support
On Chip SATA2 Controller
: Move
F1:General Help
SATA Configuration (Enhanced)
Use this item to show the Serial ATA Configuration options: Disabled, Compatible,
Enhanced.
OnBoard SATA Mode (IDE)
Use this item to select the mode of the Serial ATA.
Onboard AUDIO Function (Enabled)
Use this item to enable or disable the onboard Audio function.
Intel GLAN Function (Enabled)
Enables or disables the Intel Giga LAN function.
Intel GLAN Boot ROM (Disabled)
Use this item to enable and disable the booting from the Intel Giga LAN or a
network add-in card with a remote boot ROM installed.
Realtek GLAN Function (Enabled)
Enables or disables the Realtek Giga LAN function.
Realtek GLAN Boot ROM (Disabled)
Use this item to enable and disable the booting from the Realtek Giga LAN or a
network add-in card with a remote boot ROM installed.
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1 serial port, and to assign a
port address.
Onboard IR (Disabled)
Use this item to enable or disable the onboard infrared port, and to assign a port
address.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Integrated Peripherals
Enhanced
IDE
Enabled
Enabled
Disabled
Disabled
Enabled
Compatible
Disabled
Enhanced
3F8/IRQ4
Disabled
Enabled
Enabled
IDE Mode
Enter : Select +/-/: Value F10: Save ESC: Exit
F9: Optimized Defaults
Using BIOS
33
Help Item
Options