Installing Memory Modules - ECS X48T-A Manual

12

Installing Memory Modules

This motherboard accommodates four memory modules. It can support four 240-pin
DDR3 1600/1333/1066/800. The total memory capacity is 8 GB.
DDR3 SDRAM memory module table
Memory module
You must install at least one module in any of the four slots. Each module can be
installed with 2 GB of memory; total memory capacity is 8 GB.
The four DDR3 memory sockets (DDR3_1, DDR3_2, DDR3_3, DDR3_4) are di-
vided into two channels and each channel has two memory sockets as following:
Channel A: DDR3_1, DDR3_2
Channel B: DDR3_3, DDR3_4
Do not remove any memory module from its antistatic packaging
until you are ready to install it on the motherboard. Handle the
modules only by their edges. Do not touch the components or metal
parts. Always wear a grounding strap when you handle the modules.
Since the model supports one 1600 MHz XMP memory module on
each channel, we can only plug two 1600 MHz XMP memory mod-
ules on the motherboard.
Memory Bus
DDR3 800 400 MHz
DDR3 1066 533 MHz
DDR3 1333 667 MHz
DDR3 1600 800 MHz
Installing the Motherboard