Connecting I/O Devices - ECS X48T-A Manual

Connecting I/O Devices

The backplane of the motherboard has the following I/O ports:
PS2 Mouse
Use the upper PS/2 port to connect a PS/2 pointing device.
PS2 Keyboard Use the lower PS/2 port to connect a PS/2 keyboard.
Serial Port
Use the COM port to connect serial devices such as mouse
COM or fax/modems.
( )
ESATA Port Use this port to connect to an external SATA box or a Serial
ATA port multiplier.
Before connecting the ESATA cable, make sure to turn off
the power of the external enclosure.
LAN Ports Connect an RJ-45 jack to the LAN port to connect your
computer to the Network.
USB Ports Use the USB ports to connect USB devices.
SPDIFO This jack connects to external digital audio output devices.
SPDIFI
This jack connects to external digital audio input devices.
Optical SPDIF
This jack connects to external optical digital audio output
Output devices.
Audio Ports Use the audio jacks to connect audio devices. The C port is
for stereo line-in signal, while the E port is for microphone
in signal. This motherboard supports audio devices that cor-
respond to the A,B, and D port respectively. In addition, all
of the 3 ports, B, and D provide users with both right & left
channels individually. Users please refer to the following
note for specific port function definition.
A: Center & Woofer
B: Back Surround
C: Line-in
The above port definition can be changed to audio input or
audio output by changing the driver utility setting.
Installing the Motherboard
D: Front Out
E: Mic_in Rear
-
21