ECS X48T-A Manual page 37

APIC Mode (Enabled)
This item allows you to enable or disable the APCI (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.
1st/2nd3rd Boot Device (Corsair Flash Voyag/CD/DVD/1st FLOPPY DRIVE)
Use this item to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.
Hard Disk Drives
Scroll to this item and press <Enter> to view the following screen:
CMOS SETUP UTILITY – Copyright (C) 1985-2008, American Megatrends, Inc.
Hard Disk Drives
1st Drive
2nd Drive
: Move
F1: General Help
Press <Esc> to return to the Advanced Setup page.
Removable Drives
Scroll to this item and press <Enter> to view the following screen:
CMOS SETUP UTILITY – Copyright (C) 1985-2008, American Megatrends, Inc.
Removable Drives
1st Drive
: Move
F1: General Help
Press <Esc> to return to the Advanced Setup page.
Hard Disk Drives
Specifies the boot
ST3160812AS
sequence from the
Corsair Flash Voyag
available devices.
Enter : Select
+/-/: Value F10: Save ESC: Exit
F9: Optimized Defaults
Removable Drives
Specifies the boot
1st FLOPPY DRIVE
sequence from the
available devices.
Enter : Select +/-/: Value
F10: Save ESC: Exit
F9: Optimized Defaults
Using BIOS
Help Item
Help Item
31