Expansion Slots - ECS X48T-A Manual

Expansion Slots

Installing Add-on Cards
The slots on this motherboard are designed to hold expansion cards and connect them
to the system bus. Expansion slots are a means of adding or enhancing the
motherboard's features and capabilities. With these efficient facilities, you can in-
crease the motherboard's capabilities by adding hardware that performs tasks that are
not part of the basic system.
PCI1~2 Slots This motherboard is equipped with two standard PCI slots. PCI
stands for Peripheral Component Interconnect and is a bus stan-
dard for expansion cards, which for the most part, is a supple-
ment of the older ISA bus standard. The PCI slots on this board
are PCI v2.3 compliant.
PCIEX16/
The PCI Express x16 slots are used to install an external PCI
Express graphics card that is fully compliant to the PCI Express
PCIEX16_C
Base Specification revision 2.0. For CrossFireX
Slots
please refer to Chapter 5.
PCIE1~2 Slots The PCI Express x1 slots are fully compliant to the PCI Ex-
press Base Specification revision 1.1.
Before installing an add-on card, check the documentation for the
card carefully. If the card is not Plug and Play, you may have to
manually configure the card before installation.
Installing the Motherboard
15
TM
information