Table of Contents
Advertisement
Installation instructions
CAUTION!
The new appliance may only be installed and connected by a qualified installation
engineer. Please comply with this instruction. If you do not, any damage resulting
is not covered by the warranty.
To prevent future hazards, damaged mains cables must be replaced by your local
Service Force engineer or by a qualified service engineer.
Safety information for the installer
• The set-up of the electrical installation is arranged so that the appliance can be
isolated from the mains with a minimum 3 mm all-pole contact separation.
Suitable separation devices include e. g. cut-outs, fuses (screw fuses are to be
taken out of the holder), RCDs and contactors.
• The site must provide a connection to the electrical supply by means of a socket
that is accessible and outside the configuration space.
• Anti-shock protection must be provided by the installation.
• The built-in unit must meet the stability requirements of DIN 68930.
55
Hide quick links:
Advertisement
Table of Contents
