Table of Contents
Advertisement
Please carry out the following checks on your appliance before calling a Service Engineer.
It may be that the problem is a simple one which you can solve yourself without the expense
of a service call.
In-guarantee customers should make sure that the checks have been made as the
engineer will make a charge if the fault is not a mechanical or electrical breakdown.
Please note that proof of purchase is required for in-guarantee service calls.
Problem
The grill, ovens and timer do not
work.
The grill does not work or cuts
out after being used for a long
period of time.
The indicator neons are not
working correctly.
The oven is not cooking evenly.
The oven light fails to illuminate. The oven light bulb may need replacing.
The oven fan is noisy.
The oven temperature is too high
or too low.
Installation Instructions
Installation
• The set-up of the electrical installation is arranged so that the appliance can be isolated
from the mains with a minimum 3 mm all-pole contact separation.
Suitable isolation devices include, for example, circuit breakers, fuses (screw type fuses
are to be removed from the holder), RCDs and contactors.
• Anti-shock protection must be provided by the installation.
• The built-in unit must meet the stability requirements of DIN 68930.
Check that the appliance has been wired in to the appliance
supply and is switched on at the wall.
Check that the main appliance fuse is working.
If you have checked the above: Allow the appliance to cool for
a couple of hours. The appliance should now be working nor-
mally.
Ensure the cooling fan is running when the grill is on. If the
cooling fan fails, the grill will not operate correctly. Contact your
local service force centre.
Leave the grill door open and allow the grill to cool. After a
couple of hours check that the grill works as normal
Check that you have selected only the function you require.
Ensure all other controls are in the off position.
Check that the appliance is correctly installed and is level.
Check that the recommended temperatures and shelf positions
are being used.
Check that the oven is level.
Check that the shelves and bakeware are not vibrating in contact
with the oven back panel.
Check that the recommended temperatures and shelf positions
are being used. Be prepared to adjust the temperature up or
down slightly to achieve the results you want.
Installation
Possible Solution
27
Advertisement
Table of Contents
