Special Information About 5-Button Voice Terminals; 5-Button Voice Terminal Programming Tips; Special Lnformation About Basic Telephones - AT&T MERLIN 3070 Administration Manual

Special Information about 5-Button
Voice Terminals
If some people in your office have 5-button voice terminals, you may need to answer
some questions for them or give them some special help.

5-BUTTON VOICE TERMINAL PROGRAMMING TIPS

Buttons not assigned to intercom or outside lines are programmable.
For frequently used telephone numbers, people using 5-button voice terminals
can program up to 22 Personal Speed Dial codes and a Speed Dial Access but-
ton. These codes can then be used to access 22 different telephone numbers.
People using 5-button voice terminals can access the Last Number Redial
feature by touching the Speed Dial Access button and dialing 24. Similarly, peo-
ple using 5-button voice terminals can access the Saved Number Redial feature
by touching the Speed Dial Access button and dialing 23 (see the initial feature
assignments diagram, page 29).
Special Information about Basic
Telephones
If you have basic Touch-Tone or rotary telephones connected to a Basic Telephone
Module, the people assigned these telephones only have access to one primary line
because you cannot administer secondary lines to them. The people who use basic
Touch-Tone or rotary telephones can access any PBX/Centrex features they are used
to by using the procedures found in their PBX/Centrex system user's guide.
48