Use This; How To Put It Together - Bissell PowerLifter User Manual

This User's Guide has been designed to help you
get the utmost satisfaction from your Powerlifter
Deep Cleaner. You'll find assembly instructions for all
cleaning tasks, safety precautions, pre-cleaning tips,
and maintenance and troubleshooting instructions.
Please read this Guide thoroughly before assembling
your Powerlifter.
Casters. Locate 4 casters inside plastic packaging in
1.
collection tank. Turn tank unit upside down. Insert
four casters and push until they snap into place.
Ball. Place ball on raised area of
2.
recovery tank bottom. [NOTE: Ball
may have an unusual color due to
recycled high density polyethylene
(HDPE) used in its manufacture].
Ball Cage. Position ball cage over
3.
ball and press cage firmly onto
raised area.
Motor Filter. Locate motor filter
4.
and insert it into cavity on the
underside of the top power unit.
Motor filter must be in place at
all times.
Tank Unit. Flip carrying handle
5.
down over filling cavity on tank unit.
Top Power Unit. Place top power unit on tank unit.
6.
Twist top power unit until in drops into
place on tank unit. Flip up carrying handle to
lock units.
Aluminum Wands. Fit bottom wand section into top
7.
aluminum wand section. [NOTE: Wands are identical
and interchangeable. Buttons must be on upper end
of wands for proper assembly. Aluminum wands fit
together snugly.] Latch button pops through hole to
lock sections together.
Floor Nozzle. Fit floor nozzle over bottom wand and
8.
lock with latch button.
How to use this
Pay particular attention to the assembly diagram,
assembly instructions, and part names. Locate and
organize all parts before assembly. Familiarize
yourself with the parts and where they go. Following
the Guide will greatly enhance your ability to get
the best performance from your Powerlifter for
many years.

How to put it together

Ball Cage
Ball
Tank Unit
Top Power Unit
Motor Filter
guidelean carpet
Tip:
Several parts are
packed inside
the collection
tank/tank unit.
Separate tank
unit from top
power unit to
find these parts.
Also, match
the number
on the written
instructions to
the number on
the assembly
picture to better
understand each
assembly step.
4