Bissell PowerLifter User Manual page 8

How to clean upholstery and small areas
To clean upholstery, disconnect
wand solution tube and aluminum
wand from grip/trigger unit.
Moisten O-ring at base of cap
valve with soapy water. Align the
Small Area Cleaning Nozzle
with the cap valve and vacuum
tube on grip/trigger unit, then
press latch button on vacuum
tube and slide together until latch
button locks in place.
Tip:
Check upholstery
stuffing before
cleaning.
Colored stuffing
may bleed
through fabric
when wet.
8
1. Disconnect wand solution tube and aluminum wands from
2. Moisten O-ring at base of cap valve with soapy water.
3. Align small area cleaning nozzle with cap valve and
4. Press latch button on vacuum tube and slide small area
5. Check manufacturer's tag and/or test fabric in an
1. Press on vacuum/suction and pump/spray switches.
Vacuum/suction switch
2. Depress trigger and pull small area cleaning nozzle
3. Release trigger and repeat action to extract excess moisture.
4. Repeat until area is clean.
5. See WHEN YOU'RE DONE, page 7 and PUTTING IT AWAY,
Pump/spray switch
Getting ready
grip/trigger unit.
vacuum tube on grip/trigger unit.
cleaning nozzle on until latch button locks in place.
inconspicuous place.
Cleaning
toward you.
page 11.