How To Begin; Deep Cleaning Carpet; Cleaning Bare Floors - Bissell PowerLifter User Manual

Always vacuum before you clean.
If possible, move larger furniture
aside. But if it's not possible to
move your furniture, don't worry
- your Powerlifter features a
cleaning wand that easily
maneuvers under and around
furniture.
6

How to begin...

Deep cleaning carpet

1. Vacuum carpet.
2. Decide where to begin — and end — your job. Clean in
3' X 4' sections, starting in areas farthest from exit. Plan to
leave a path open to empty collection tank and replenish
filling cavity.
3. Carpet will dry in two to four hours, depending on carpet
style and air circulation in room. A floor fan speeds drying.
4. Plan activities to give carpet time to dry.
5. Replace furniture on damp carpet by placing waxed paper
under legs until floor dries completely.
Deep cleaning upholstery
1. Check manufacturer's tag before cleaning. "W" or "WS" on
the tag means you can use your Powerlifter. If tag is coded
with an "S" (with diagonal strike-through), or says "Dry
Clean Only," do not proceed.
2. If manufacturer's tag is missing or not coded, check with
your furniture dealer.
3. If possible, check upholstery stuffing. Colored stuffing may
bleed through fabric when wet.
Tip:

Cleaning bare floors

Deep cleaning
carpet and
upholstery
1. The Powerlifter is not recommended for cleaning wood floors.
regularly can
2. Use only Bissell Floor Cleansing Formula
reduce dust and
Never use a Bissell Fiber Cleansing Formula
allergens in
cleaners on bare floors.
your home.
3. Sweep before starting.
4. Remove old wax before cleaning.
5. Leave an exit path.
6. Allow at least 1/2 hour drying time.
™
on no-wax floors.
™
or other carpet