Wet Vacuuming; Putting It Away - Bissell PowerLifter User Manual

Putting it away

After deep cleaning/wet vacuuming
1. Rinse filling cavity with clean water. Leave about 1/2
2. Hold floor nozzle over bucket or sink.
3. Press on pump/spray switch, pull trigger for 30 seconds,
4. Empty filling cavity of excess water.
Siphon
5. Drain solution hoses.
tube filter
6. Empty and rinse collection tank.
7. Rinse and dry collection tank, ball cage, ball, wands,
8. Remove tank siphon tube from opening on power unit.
9. Remove filter from end of tank siphon tube, clean filter
Tip:
under running water, then replace filter in end of tank
Always clean
10. Replace tank siphon tube in opening in power unit.
floor nozzle
spray tip and
11. We recommend that you air dry before closing unit
tank siphon
tube filter
before storing
appliance.
gallon of clean water in filling cavity.
and empty power unit.
and tools.
siphon tube.
for storage.
11