Bissell PowerLifter User Manual page 9

Getting ready
Note: The bare floor attachment is included with the PLUS Series
only. It may be ordered as an additional accessory by contacting
Consumer Services.
1. Attach bare floor attachment to bottom of floor nozzle with
rubber and brush strips facing out. Align front edges and
snap together.
2. Fill formula measuring cup twice with Floor Cleansing
Formula and empty into filling cavity.
3. Pour two gallons of hot tap water, not to exceed 120°F/48°C,
into filling cavity. Water level should reach the bottom
of three vertical lines in tank unit.
Cleaning
1. Press vacuum/suction and
pump/spray switches on.
2. Depress trigger and pull floor nozzle toward you.
3. Release trigger and repeat action to extract excess moisture.
4. Disconnect bare floor attachment. Turn off machine,
hold floor nozzle away from you, push bare floor tool off
with thumbs.
5. See WHEN YOU'RE DONE, page 7 and PUTTING IT AWAY,
page 11.
How to clean bare floors
Vacuum/suction switch
Pump/spray switch
Floor Nozzle
Bare Floor
Attachment
To clean bare floors, attach
Bare Floor Attachment to
bottom of Floor Nozzle with
the rubber and brush strips
facing out. Align front edges
and snap together.
9