Advertisement

PowerLifter
®
Plus
U S E R ' S G U I D E
MODEL 1620
3
Safety Instructions
4
Product View
5
Assembly
6-12
Operations / Special Tools
Routine Maintenance
12-16
Troubleshooting
17-18
18
Consumer Services
19
Replacement Parts
20
Warranty

Advertisement

Table of Contents
loading

Summary of Contents for Bissell 1620

  • Page 1 PowerLifter ® Plus U S E R ’ S G U I D E MODEL 1620 Safety Instructions Product View Assembly 6-12 Operations / Special Tools Routine Maintenance 12-16 Troubleshooting 17-18 Consumer Services Replacement Parts Warranty...
  • Page 2 My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your PowerLifter Plus. Thanks again, from all of us at BISSELL.
  • Page 3: Important Safety Instructions

    Use only manufacturer’s recommended attachments. Use only cleaning products formulated by BISSELL for use in this appliance. Keep openings free of dust, lint, hair, etc. Keep appliance on a level surface. Turn off all controls before unplugging.
  • Page 4 Bottle Floor Nozzle Window WARNING: To reduce the risk of fire, use only BISSELL Deep Cleaning Formulas in your PowerLifter Plus. Use of cleaning formulas that contain lemon or pine oil may damage this appliance and void warranty. Chemical spot cleaners or sol- vent-based soil removers should not be used.
  • Page 5: How To Use This Guide

    Assembly is now complete. What Comes With Your PowerLifter Plus Tough Stain Tool 16 oz. Fiber Cleansing Formula ™ with Scotchgard protection Always use BISSELL Deep Cleaning Formulas. Non-BISSELL cleaning solutions may harm your cleaner and void the warranty. Phillips Head Screw...
  • Page 6 Turn the bottle over so the valve cap is in an upward position. Unscrew the cap and fill the bottle to the mark with BISSELL Deep Cleaning Formula. Replace the cap until snug. Replace SmartMix Bottle. Choose the SmartMix setting that fits the cleaning job.
  • Page 7 To Fill The Tank-in-Tank This easy-to-use system is designed with a bladder inside the tank to hold clean water. As you clean, the bladder will empty. Dirty water collects in the tank outside the bladder. Depress the Handle Release pedal to tilt back the handle.
  • Page 8: To Empty The Tank-In-Tank

    When It’s Time To Empty The Tank-in-Tank NOTE: Remove the Tank-in-Tank, following steps 1 and 2 on page 7. Carry the Tank-in-Tank, like a bucket, to the sink to dispose of the dirty water. Remove Tank Lid. Pour out dirty water. After each use, remove and rinse the red Lint Screen located on the Tank Lid.
  • Page 9: Machine Preparation

    While pressing the trigger, slowly make several passes over the area to be cleaned. CAUTION: Do not overwet. Turn the machine Power Switch OFF and let the BISSELL Deep Cleaning Formula dissolve the tough soil for one to two minutes before continuing.
  • Page 10: Normal Cleaning

    Power Switch ON. Set the ReadyTools Dial to FLOORCLEANING While pressing the Spray Trigger, make one slow forward and back wet pass. Let the BISSELL Deep Cleaning Formula and DirtLifter PowerBrush do the work for you. Caution: Do not overwet.
  • Page 11 How To Clean Upholstery and Small Areas Important - Check Upholstery Tags Check manufacturer’s tag before cleaning. A "W" or "WS" on the tag means you can use your PowerLifter Plus. If the tag is coded with an "X" or "S" (with a diagonal strike through), or says "Dry Clean Only,"...
  • Page 12: Maintenance & Storage

    Cleaning Technique Connect the Tough Stain Tool to the Flex Hose. Plug into a proper outlet and turn the Power Switch ON. While pressing the trigger, slowly move the spraying tool back and forth over the soiled surface. Release the trigger to suction soiled water.
  • Page 13 Maintenance/Storage Continued Rinse out Tank-in-Tank and reseat the tank onto the machine. Clean out the Flow Indicator Filter each time it is used to ensure best cleaning performance. Unscrew the Flow Indicator cap, lift out the red Rotor and white Filter. Rinse all three parts in tap water. Replace the Filter and Rotor.
  • Page 14 To Remove Broken Pump & Brush Belts-Continued Turn the machine onto its side so the belt access area is facing upward (see illustration). On the bottom of the machine, near the belt access area, is a red Retainer Plate that holds the black brush arm and brush in place.
  • Page 15 To Install The Replacement Pump & Brush Belts With the unit still on its side, loop one end of the replacement Pump Belt around the red Pump Pulley and the other end around the silver motor shaft (see illustration). Do not twist the replacement Pump Belt.
  • Page 16 Belt Access Door (see illustration). Assembly is now complete. If you have any questions, or if you have any trouble installing your replacement Pump Belt, please call BISSELL Consumer Services at 1-800-237-7691. Or visit the BISSELL website : www.bissell.com...
  • Page 17: Troubleshooting

    Pump Belt looped around the motor shaft. If it is broken or missing, please refer to the part numbers and descriptions on page 19 before calling BISSELL Consumer Services. Complete installation instructions will accompany the replacement belt.
  • Page 18: Please Do Not Return This Product To The Store

    Grand Rapids MI 49501 ATTN: Consumer Services Or visit the BISSELL website - www.bissell.com When contacting BISSELL, have model number of unit available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ NOTE: Please keep your original sales receipt. It is your warranty.
  • Page 19: Part Numbers And Descriptions

    210-6214 Flow Indicator O-ring 210-7635 Flow Indicator Rotor 210-3510 Flow Indicator Filter 014-9865 Floor Nozzle Window 0710 48 oz. BISSELL Fiber Cleansing Formula with Scotchgard 0400 22 oz. BISSELL Tough Stain PreCleaner ® Bottle (Includes Cap) ® Cap Assembly ™...
  • Page 20: About Your Warranty

    PO Box 3606 Grand Rapids MI 49501 ATTN: Consumer Services BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.

This manual is also suitable for:

Powerlifter plus 1620Powerlifter plus

Table of Contents