Dry Vacuuming; Wet Vacuuming; Putting It Away; 011-3529 Tank Siphon Tube Filter - Bissell 1660 User Manual

Putting it away

After deep cleaning/wet vacuuming
1. Rinse filling cavity with clean water. Leave about 1/2
gallon of clean water in filling cavity.
2. Hold floor nozzle over bucket or sink.
3. Turn on pump/spray switch, pull trigger for 30 seconds,
and empty power unit.
Tank siphon
4. Empty filling cavity of excess water.
tube filter
5. Drain solution hoses.
6. Empty and rinse collection tank.
7. Rinse and dry collection tank, ball cage, ball, wands,
and tools.
8. Remove tank siphon tube from opening on power unit.
Tip:
9. Remove filter from end of tank siphon tube, clean filter
Always clean
under running water, then replace filter in end of tank
floor nozzle
siphon tube.
spray tip and
10. Replace tank siphon tube in opening in power unit.
tank siphon
tube filter
11. We recommend that you air dry before closing unit
before storing
for storage.
appliance.
After dry vacuuming
1. Remove motor filter from top power unit and rinse with
water. Squeeze to remove water, then air dry before
reinstalling. Clean after each vacuuming.
2. Remove dry filter bag from ball cage. Shake to remove
surface dirt. Rinse bag by hand in warm water.
Air dry before reinstalling.
11