fig. 39
❒ release clip C-fig. 39 and remove the
light unit from the lens unit;
144
❒ replace the pressure-fitted burnt out
bulb D;
❒ refit by reversing the above mentioned
operations.
IF AN INTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
"When needing to change a bulb".
CEILING LIGHT
To change the bulb, proceed as follows:
❒ insert the screwdriver supplied with the
F0G0211m
car in the point shown by the arrow
and remove the ceiling light A-fig. 40;