If An Interior Light Burns Out - Fiat Linea Owner's Handbook Manual

IF AN INTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
"When needing to change a bulb".
FRONT CEILING LIGHT
To replace the bulbs proceed as follows:
❒ work in the points shown by the ar-
rows and remove light A-fig. 29;
❒ open the protection lid B-fig. 30;
❒ replace bulbs C releasing them from the
side contacts; make sure that new bulbs
are correctly clamped between contacts;
❒ re-close the lid B-fig. 30 and secure light
A-fig. 29 into its housing locking it
properly.
fig. 29
fig. 30
REAR CEILING LIGHT
(where provided)
To replace the bulbs proceed as follows:
❒ work in the points shown by the ar-
rows and remove light D-fig. 31;
❒ open the protection lid E-fig. 32;
F0R0115m fig. 31
F0R0117m fig. 32
❒ change the bulb F-fig. 32 releasing it
from the side contacts and making sure
the new bulb is correctly fastened be-
tween the contacts;
❒ re-close the protection lid E-fig. 32
and secure light D-fig. 31 into its hous-
ing locking it properly.
F0R0116m
F0R0118m
165