192
IF AN INTERIOR LIGHT BURNS OUT
For the type of bulb and power rating, see "If a bulb burns out".
FRONT CEILING LIGHT
To replace the 12V-10W cylindrical bulbs:
❒ remove plastic caps (A) and casing (B) using a screwdriver;
❒ unscrew the four screws (two in A and two in B) and slide the ceiling
F0E0255m
light downwards toward the windscreen;
❒ disconnect connector (D) from (C);
❒ lift cover (E) using a screwdriver;
❒ replace the burn out bulb;
❒ reconnect the electrical connector and refit the ceiling light first
clicking it into place then securing it with the screws. Refit the plastic
caps (A) and the casing (B).
F0E0623m