Fiat Panda Owner's Handbook Manual page 131

fig. 7
❒ fit the spare wheel making pin N-fig.
7 coincide with one of the wheel holes
O;
❒ fasten the four fastening bolts;
❒ turn the jack handle to lower the car
and remove the jack;
130
F0G0204m fig. 8
❒ fasten bolts completely, working in a
criss-cross fashion as shown in fig. 8.
REFITTING THE STANDARD
WHEEL
❒ Following the above procedure, raise
the car and remove the space saver
wheel;
❒ make sure the contact surfaces be-
tween wheel and hub are clean so that
the fastening bolts will not come loose;
F0G0206m fig. 9
fig. 9/a
❒ fit the standard wheel by inserting the
first bolt L-fig. 9 in the hole next to the
inflation valve;
❒ fit the wheel cap making the symbol
coincide with the inflation valve and the
bolt previously fastened to the hole M-
fig. 9/a ;
F0G0233m
F0G0603m
C