Fiat Panda Owner's Handbook Manual page 144

fig. 35
Number plate light
To change the bulb, proceed as follows:
❒ use a screwdriver to remove the re-
taining spring as shown in fig. 35;
F0G0099m fig. 36
❒ remove the transparent A-fig. 36 and
the bulb B from the bulb holder;
❒ change the 12V-5W bulb pressure-fit-
ted in the bulb holder;
❒ refit the lens.
F0G0100m fig. 37
fig. 38
THIRD STOP LIGHT
To change the bulb, proceed as follows:
❒ slacken the two screws A-fig. 37 and
remove the whole cover;
❒ disconnect connector B-fig. 38 and re-
move the light unit;
F0G0101m
F0G0210m
143