If An Interior Light Burns Out - Fiat Ducato Owner's Handbook Manual

Hide thumbs Also See for Ducato:
Table of Contents

Advertisement

fig. 31
fig. 32
THIRD BRAKE LIGHT fig. 31-32
To change the bulb proceed as follows:
❒ loosen the two fastening screws A-
fig. 31;
❒ remove the lens unit;
❒ press the tabs B-fig. 32 and remove
the bulb holder;
❒ remove the snap-fitted bulb and re-
place it.
156
F0N0141m
fig. 33
NUMBER PLATE LIGHT fig. 33
To change the bulb proceed as follows:
❒ work in the point shown by the arrow
and remove the lens unit A;
❒ change the bulb releasing it from the
side contacts and making sure the new
bulb is correctly fastened between the
contacts;
❒ refit the snap-fitted lens unit.
F0N0142m
IF AN INTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
"When needing to change a bulb".
FRONT CEILING LIGHT
To replace the bulbs proceed as follows:
❒ work in the points shown by the ar-
F0N0089m
rows and remove light A-fig. 34;
❒ open the protection lid B-fig. 35;
❒ replace bulbs C-fig. 35 releasing them
from the side contacts; make sure that
new bulbs are correctly clamped be-
tween contacts;
❒ re-close the lid B-fig. 35 and secure
light A-fig. 34 into its housing lock-
ing it properly.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents