Quick Tyre Repair Kit - Fix & Go Automatic - Fiat Panda Owner's Handbook Manual

QUICK TYRE REPAIR
KIT - FIX & GO
automatic
The quick tyre repair kit Fix & Go auto-
matic is placed in the boot; the tool bag
fig. a, is located under the driver's seat
and it is fastened by means of "velcro" type
adhesive.
The kit fig. 1 includes:
❒ bottle A containing sealer and fitted
with:
– filling pipe B;
– sticker C bearing the notice "max.
80 km/h", to be placed in a position
visible to the driver (on the instru-
ment panel) after fixing the tyre;
❒ instruction brochure (see fig. 2), to be
used for prompt and proper use of the
quick repair kit and to be then handed
to the personnel charged with handling
the treated tyre;
❒ compressor D-fig. 1 including gauge
and connections;
❒ a pair of protection gloves located in
the side space of the compressor;
❒ adapters for inflating different elements.
In the tool bag you also find the screw-
driver, the tow ring and the jack.
132
fig. a
WARNING
Hand the instruction brochure
to the personnel charged with
treating the tyre repaired with the kit.
In the event of a puncture
caused by foreign bodies, it is
possible to repair tyres show-
ing damages on the track or
shoulder up to max 4 mm diameter.
WARNING
Holes and damages on the
tyre side walls cannot be re-
paired. Do not use the quick tyre re-
pair kit if damaging is due to running
with flat tyre.
F0G0607m fig. 1
fig. 2
WARNING
Repairs are not possible in
case of damages on the
wheel rim (bad groove distortion
causing air loss). Do not remove for-
eign bodies (screws or nails) from the
tyre.
F0G0669m
F0G0670m