Using AltiReach
Figure 5. AltiReach CallView page
The call log box at the top shows the extension or phone number ( Caller
ID) of incoming calls, the name if available, and the time and date of each
call. The green Message indicator turns red when there are messages in the
user's mailbox.
Up to 30 call entries are displayed. This "call log" information is cleared
when AltiReach is closed.
Using CallView to Make or Receive Calls
•
Answer a call - simply pickup the handset or click the FLASH button
if your phone is on Dial Tone Mute Mode (#82) with the speaker phone
turned on.
•
Dial an extension - with the handset off-hook, click any extension
number in the page and press the Dial Ext. button to automatically dial
that extension.
•
Placing a call on hold - while connected to a call, click one of the four
Hold buttons. The Hold button becomes a Retrieve button. You can
place up to four calls on hold at the same time.
44 AltiServ User Guide