Registration Clutch (Pl 5.1.20) - Xerox 7300B - Phaser Color Laser Printer Service Manual

Registration Clutch (PL 5.1.20)

1. Remove the Rear Shield Plate (see pg. 6-146).
2. Disconnect the RCL connector from the Engine Controller Board.
3.
Remove 1 screw securing the ground strap to the motor bracket.
4.
Remove the e-ring (item #1) securing the clutch to the registration shaft B.
5. Remove the Registration Clutch (item #2).
Reassembly
Note: Be sure the fork on the bottom of the registration clutch
straddles the plastic tab on reassembly.
FRU Disassembly
2
1
S7300-68
6-173