Back Plate Assembly W/Drive Gears (Pl 5.2.11) And Imaging Unit Motors (Pl 5.2.13) - Xerox 7300B - Phaser Color Laser Printer Service Manual

Back Plate Assembly w/Drive Gears (PL 5.2.11) and
Imaging Unit Motors (PL 5.2.13)
1. Remove the Printer Unit Chassis (see pg. 6-156).
2.
Remove the 5 G screws securing the Back Plate Assembly to the frame.
3.
Disconnect the wiring harnesses from all four Imaging Unit Motors.
4. Lift the front of the Back Plate Assembly about 2 cm (3/4 in.) and carefully guide
the ribbon cable through the assembly as you lift it from the chassis to remove.
1
Imaging Unit Motors
1.
Remove 2 G screws securing the Imaging Unit Motor to the Back Plate Assembly.
2. Disconnect cable.
3. Remove the motor.
6-186 Phaser 7300 Color Printer Service Manual
S7300-79