Internal Connectors - Asus P7H55/USB3 User Manual

Audio 2, 4, 6, 8-channel configuration
Headset
Port
2-channel
Light Blue Line In
Lime Line Out
Pink Mic In
Orange –
Black –
Gray –
1.8.2

Internal connectors

1. ATX power connectors (24-pin EATXPWR, 4-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
• For a fully configured system, we recommend that you use a power supply unit (PSU)
• Do not forget to connect the 4-pin EATX12V power plug. Otherwise, the system will not
• If you are uncertain about the minimum power supply requirement for your system,
1-22
4-channel
Line In
Front Speaker Out
Mic In
–
Rear Speaker Out
–
that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum
power of 350 W.
boot.
refer to the Recommended Power Supply Wattage Calculator at http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
6-channel 8-channel
Line In Line In
Front Speaker Out Front Speaker Out
Mic In Mic In
Center/Subwoofer Center/Subwoofer
Rear Speaker Ou Rear Speaker Out
– Side Speaker Out
Chapter 1: Product introduction