Asus P7H55/USB3 User Manual page 37

6. Intel H55 Serial ATA connectors (7-pin SATA1-6)
®
These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives
and optical disc drives.
• These connectors are set to Standard IDE mode by default. In Standard IDE mode, you
can connect Serial ATA boot/data hard disk drives to these connectors.
• You must install Windows
hard disk drives.
• When using hot-plug and NCQ, set the Configure SATA as item in the BIOS to [AHCI].
See section Storage Configuration for details.
ASUS P7H55/USB3
XP Service Pack 2 or later version before using Serial ATA
®
1-25