Change User Password - Asus P7H55/USB3 User Manual

After you have set a supervisor password, the other items appear to allow you to change
other security settings.
User Access Level [Full Access]
This item allows you to select the access restriction to the Setup items.
[No Access]
[View Only]
[Limited]
[Full Access]

Change User Password

Select this item to set or change the user password. The User Password item on top of the
screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a User Password:
1. Select the Change User Password item and press <Enter>.
2. On the password box that appears, type a password composed of at least six letters
and/or numbers, then press <Enter>.
3. Confirm the password when prompted.
The message Password Installed appears after you set your password successfully.
To change the user password, follow the same steps as in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
[Setup]
[Always]
2-24
Prevents user access to the Setup utility.
Allows access but does not allow change to any field.
Allows changes only to selected fields, such as Date and Time.
Allows viewing and changing all the fields in the Setup utility.
BIOS checks for user password when accessing the Setup utility.
BIOS checks for user password both when accessing Setup and booting
the system.
Chapter 2: BIOS information