Local And Replicated Snapshot Validation - American Megatrends StorTrends User’s guide User Manual

Local and Replicated Snapshot validation

These commands are used as part of snap validation.
enable
snapvalidation
disable
snapvalidation
pause
snapvalidation
resume
snapvalidation
get
snapvalidation
list
snapvalidation
resume
snapvalidation
pause
snapvalidation
-t/--type local
-c/--containername <containername>
-v/--volumename<volumename>
-x/--xml
Example:
enable -t local -c Cont0 -v Volume0 snapvalidation
-t/--type local
-c/--containername <containername>
-v/--volumename<volumename>
-x/--xml
Example:
disable –t local -c Cont0 -v Volume0
snapvalidation
-t/--type local
-c/--containername <containername>
-v/--volumename<volumename>
-x/--xml
Example:
pause -t local -c Cont0 -v Volume0snapvalidation
-t/--type local
-c/--containername <containername>
-v/--volumename<volumename>
-x/--xml
Example:
resume –t local -c Cont0 -v Volume0snapvalidation
-t/--type local
-c/--containername <containername>
-v/--volumename<volumename>
-x/--xml
Example:
get -t local -c Cont0 -v Volume0snapvalidation
-t/--type local
-x/--xml
Example:
list -t local snapvalidation
-t/--type (SRP/HA)
-c/--containername <containername>
-v/--volumename<volumename>
-x/--xml
Example:
resume -t SRP -c Cont0 -v Volume0 snapvalidation
resume -t HA -c Cont0 -v Volume0 snapvalidation
-t/--type (SRP/HA)
-c/--containername <containername>
This will enable local NAS snap
validation for the given NAS
volume. Once enabled, it will be
in "resumed" state by default –
meaning ALL scheduled snaps will
be validated, both already present
and those that will be created new.
This will disable local NAS snap
validation for already enabled NAS
volume.
This pause validation of NAS
snapshots for already enabled NAS
volume.
This will resume validation of
NAS snapshots for already paused
(enabled) NAS volume.
This will return the status – paused
/ resumed of the given NAS
Volume for snap validation. It will
also return the list of snapshots that
are validated so far with the status
(passed / failed)
This will return the list of NAS
volumes that are enabled for NAS
snap validation, along with the
current status – paused / resumed.
This will resume replica validation
for the given volume or volumes
SRP/HA. The remote system
information will be taken from the
given replica pair itself, so no need
to add them separately.
SRP – Sync replica module
HA – High availablility module
Pauses the already running
SRP/HA replica validation of given
Chapter Two: Command Set 43