Protocol Configuration - American Megatrends StorTrends User’s guide User Manual

set ug -t/--type {group}
-g/--groupname <groupname>
-u/--username <username>
-x/--xml

Protocol Configuration

These commands configure the various network protocols supported.
Command Argument
get protocol -t/--type {cifs/nfs/http/snmp/nis/ads/https/ftp/upnp}
set protocol -t/--type
{cifs/nfs/apple/http/snmp/nis/ads/https/ftp/upnp}
-d/--disable or
-e/--enable
-x/--xml
For example: set –t cifs –e protocol
get protocol -t /--type {snmp}
-n/--communityname
For example: get –t snmp –n protocol
get protocol -t/--type {cifs}
-w/--winserver
set protocol -t/--type {cifs}
-s/--winsserver <winsserver name>
-m/--mtype {wg/nt/ads}
-w/--workgroup <workgroupname>
-x/--xml
set protocol -t/--type {snmp}
-n/--communityname <communityname>
set protocol -t/--type {nfs}
-i/--ipaddress <ipaddress or "world" >
-d/--disable or
-e/--enable
-x/--xml
For example:
set -t nfs -i 10.0.0.124 -i 10.0.0.123 -e -x protocol
list protocol
get protocol -t/--type {nfs}
-c/--count
StorTrends® iTX Software CLI (Command Line Interface) (Version 2.7) User's Guide
20
Adds the given user to the specified
group. Multiple users can be added
using –u/--username switch.
(maximum of 8 users at a time)
Description
Gets the status of cifs, nfs, http,
snmp, nis, or ads protocols.
Enables or Disables the specified
protocol.
Gets the community name for
snmp.
Gets the Wins server address.
Sets the Wins server address.
Sets the snmp community name
By default, the public community
name is supported.
Sets the nfs clients.
Lists all the protocols and
whether they are enabled or
disabled.
Gets the number of NFS clients
that have access to NAS shares.