Date/Time Configuration; Domain Configuration - American Megatrends StorTrends User’s guide User Manual

Date/Time Configuration

These commands configure the time zone and date.
Command Argument
set timezone -z/--zone <zone name>
-x/--xml
For example: set –z America/New_York timezone
get timezone For example: get timezone
set datetime -n/--ntp <FQDN of NTP server or ipaddress>
get timezone -c/--count
set datetime -d/--date <date in MM/DD/YYYY>
-t/--time <time in HH:MM:SS>
-x/--xml
For example: set –d 12/01/2006 –t 12:11:55
datetime
list timezone For example: list timezone
get datetime For example: get datetime

Domain Configuration

These commands configure the domain server to be used for authentication.
Command Argument
get domain -t/--type {nis/ms}
-x/--xml
For example: get –t nis domain
set domain -t/--type{ nis }
-b/--broadcast {y/n}
-d/--domain <domainname >
-s/--server <server-1>
-s/--server <server-2>
-x/--xml
For example: set -t nis -b n -d NISSERV -s
10.0.0.215 -s 10.0.0.25 -s 10.0.0.5 domain
set domain -t/--type {ms}
-m/--mtype {wg}
-d/--domain< domainname>
-x/--xml
For example: set -t ms -m wg -d MYGROUP
domain
set domain -t/--type {ms}
-m/--mtype {/nt/ads}
-d/--domain< domainname>
-D/--nbname<netbiosname> (optional)
-i/--ip <serverip>
-I/--secip<secondary serverip> (optional)
-o/--orgname <orgName> (optional)
-u/--user <Adminname >
-p/--passwd <Adminpassword>
-x/--xml
For example: set –t ms –m ads –d domain1.com –D
domain1 –I 10.10.220.1 –u Administrator –p
password domain
StorTrends® iTX Software CLI (Command Line Interface) (Version 2.7) User's Guide
10
Description
Sets the time zone of StorTrends®
iTX to given time zone.
Shows the configured time zone.
Configures the NTP server to be
used for time synchronization.
Gets the number of time zones.
Sets the date and time to given
values.
Lists the time zones supported.
Shows the date & time.
Description
Displays the domain information of
either NIS or Microsoft (MS)
domains.
Sets the NIS domain to given
domain with broadcast mode OFF
or ON. Servers can be added using
the –s/--server switch.
If broadcast is set to OFF, then no
servers are needed.
Sets the Microsoft domain type to
Workgroup.
Sets the Microsoft domain type to
NT / ADS.