Nas Quota Configuration - American Megatrends StorTrends User’s guide User Manual

Command Argument
-p/--port <adapter name>
remove network -t/--type alias
-n/--name <alias name>

NAS Quota Configuration

These commands configure quotas for the NAS volumes of your iTX box.
Command Argument
get quota -t/--type {user }
-p/--path <volume path>
-n/--name <user name>
-x/--xml
For example: get –t user –p c0_nas0 –n user1 quota
set quota -t/--type {user }
-p/--path <volume path>
-n/--name <user name>
-q/--quotasize <size>
-f/--filecount <file count>
-x/--xml
For example: set –t user –p c0_nas0 –n user1 –q
4000 –f 400 quota
list quota -p/--path <volume path>
-x/--xml
get quota -p/--path <volume path>
-d/--default
-x/--xml
set quota -p/--path <volume path>
-q/--quotasize (KB) <quota size>
-d/--default [y/n]
-x/--xml
StorTrends® iTX Software CLI (Command Line Interface) (Version 2.7) User's Guide
18
Description
Removing an alias adapter
Description
Displays the quota configured for
the given member.
Configures the quota size of given
member.
Size should be entered in KB.
Displays the user quota configured
for a given volume as specified in
path.
Displays the default quota
configured for the volume.
Sets the default quota limit which
should be used for a volume.