Storage Resource Management - American Megatrends StorTrends User’s guide User Manual

remove -c/--container <container name>
recoverywizard -v/--volume<volumename>
-s/--snap<snapname>
-t/--tgt_name<tgt_name>
-x/--xml (optional)
Example:
remove -c c0 -v vol1 -s snap1 -t iqn.1991-
10.com.ami:itx00c09f2164459105:t08212006tgt1
recoverywizard
remove -c c0 -v vol1 -v vol2 -v vol3 –s snap4v1T2
-s snap5v2T2 -s snap6v3T2 -t iqn.1991-
10.com.ami:itx00c09f2164459105:t08222006tgt2
recoverywizard
rollback -c/--container <container name>
recoverywizard -v/--volume<volumename>
-s/--snap<snapname>
-x/--xml (optional)
Example:

Storage Resource Management

These commands are used as part of SRM.
list srm -q/--queue <workflow, pending, report>
-n/--num_tasks <number of tasks>
-o/--offset < offset in the queue >
-f/--filename <xml filename >
-x/--xml
Example:
list -q report -n 20 -o 5 srm
list -q pending -n 20 -o 5 srm
clear srm -q/--queue <workflow , pending, report >
-x/--xml
Example:
clear -q report srm
start srm Example:
start srm
stop srm Example:
stop srm
StorTrends® iTX Software CLI (Command Line Interface) (Version 2.7) User's Guide
42
rollback -c c0 -v vol1 -s snap1 recoverywizard
rollback -c c0 -v vol1 -v vol2 -v vol3 –s
snap4v1T2 -s snap5v2T2 -s snap6v3T2
recoverywizard
Remove recoverywizard disables
the target enabled in the Review
recoverywizard, removes the set of
snaps that have common 't'
number across the given set of
volume(s) from the LUN, and
deactivates the snapshot.
Note:
1) All Snaps have same't' number.
Rollback recoverywizard rollbacks
the set of volumes to set of
snapshots.
Note:
1) All Snaps have same't' number.
List the tasks in report, pending
and workflow queue of the
SRM
Clears the SRM queues such as
workflow, pending, and report
Start the Storage resource
management activity. This is by
default started in the iTX box
Stop the Storage resource
management activity