Figure 2-5: The Waterproof Service Box - Alvarion BU-DS.11 User Manual

2-12
1.
Place the O-ring of the service box in its intended location.
2.
Connect the Ethernet cable to the outdoor unit's RJ-45 connector.
3.
Attach the service box to the outdoor unit and then tighten the top nut. Make
sure that the O-ring is in its intended location to verify proper sealing.
4.
Route the cable to the location selected for the indoor unit.
5.
Insert the protective cover before connecting the indoor end to the RJ-45
connector. Prepare the indoor end of the cable according to the instructions in
Appendix B.

Figure 2-5: The Waterproof Service Box

BreezeNET DS.11 Series User Manual