Configuration - Alvarion BU-DS.11 User Manual

BreezeNET DS.11 Series Use Manual
A-6

Configuration

Can the regulatory domain (country) of a DS.11 unit be changed?
The regulatory domain is factory set and cannot be changed.
How can the DS.11 be configured or managed if the SNMP Community name
has been forgotten?
Press the reset button on the top panel with a paper clip. This will set the read and
write Community names to public and private, respectively.
How can the DS.11 unit be returned to factory default settings?
There are two ways to return the unit to its factory default settings. One way is to
use the Default button on the Station Control Tab in the DS.11 Configuration
Utility. The other is to press and hold the reset button on the back of the unit while
powering on the unit. Remember that all settings including IP addresses will be
lost when setting the unit to its factory defaults.