Lexmark 632n - T B/W Laser Printer Service Manual page 60

User attendance messages (continued)
Primary message
53 Unformatted Flash
54 Standard Network
Software Error
54 Network x
Software Error
55 Unsupported option
in Slot x
55 Unsupported Flash in
Slot x
56 Standard Serial
Disabled
56 Serial Port x Disabled
56 Standard USB Port
Disabled
56 Standard USB Port x
Disabled
Secondary message Explanation
This message displays when the printer detects an
unformatted flash at power on. Press Go to clear the
message. The flash is marked as bad and normal
operation continues. Flash operations are not allowed
until the flash is formatted.
This error displays when a network port is detected,
but the printer cannot establish communications with it.
This error displays when a network port is detected,
but the printer cannot establish communications with it.
An unsupported option is installed in the specified
solutions port. Power off the printer and remove the
unsupported option in the specified slot.
An unsupported flash option is installed in the
solutions port. Power off the printer and remove the
unsupported flash option in the specified slot.
This error displays when data is sent to the printer
across the standard serial port, but the port has been
disabled.
This error displays when data is sent to the printer
across an optional parallel port, but the port has been
disabled. Once this message displays, reporting of
further errors is suppressed until the menus are
entered, or the printer is reset.
Displayed when status is requested over the USB port,
but the port has been disabled. Once the error has
been displayed for the first time, reporting of further
errors is suppressed until the menus are entered or the
printer is reset.
The following actions may be taken:
Displayed when status is requested over the USB port
indicated, but the port has been disabled. Once the
error has been displayed for the first time, reporting of
further errors is suppressed until the menus are
entered or the printer is reset.
The following actions may be taken:
manuals4you.com manuals4you.com
• Press Go to clear the message. The printer
discards any data received on the USB port.
• Press Menu until Busy/Waiting appears. The
following are available:
- Reset Printer
- Reset Active Bin
• Press Go to clear the message. The printer
discards any data received on the USB port.
• Press Menu until Busy/Waiting appears. The
following are available:
- Reset Printer
- Reset Active Bin
Diagnostic information
4060-xxx
2-27