Lexmark 632n - T B/W Laser Printer Service Manual page 55

4060-xxx
User attendance messages (continued)
Primary message
Insert <tray>
Install Bin x
or Cancel Job
Install Duplex
or Cancel Job
Install Env Feed
or Cancel Job
2-22
Service Manual
Secondary message Explanation
<tray>=Tray 1, Tray 2, Tray 3, Tray 4, or Tray 5.
The printer detects a tray needs to be inserted. The
printer does not continue until it detects the tray is
inserted.
Note: This situation usually occurs when the tray is
refilled during a job. To refill a tray during a printing
session, press Stop and wait for pages to reach the
output bin before refilling the tray.
The following actions may be taken:
• Insert the requested tray.
• Press Menu until Busy/Waiting displays. The
following selections are available:
- Cancel Job
- Reset Printer
- Reset Active Bin
If the message cannot be cleared, go to
card/paper size sensing service check" on
page 2-66 or "Input tray(s) service check" on
page 2-64.
Bin x=Bin 1, Bin 2, or Bin 3.
This message is displayed when a paper handling
option has been hot unplugged. The printer requires
the reinstallation of the option to print a page which
has been formatted by the interpreter before the option
was removed.
The following actions may be taken:
• Install the option.
• Press Menu until Busy/Waiting displays. Select
one of the following:
- Cancel Job
- Reset Printer
- Reset Active Bin
If the message cannot be cleared, go to
service check" on page 2-64.
This message is displayed when a duplex option has
been hot unplugged. The printer requires the
reinstallation of the option to print a page which has
been formatted by the interpreter before the option
was removed.
The following actions may be taken:
• Install the duplex option.
• Press Menu until Busy/Waiting displays. Select
one of the following:
- Cancel Job
- Reset Printer
- Reset Active Bin
If the message cannot be cleared, go to
option service check" on page
This message is displayed when the envelope feeder
has been hot unplugged. The printer requires the
reinstallation of the feeder to print a page which has
been formatted by the interpreter before the feeder
was removed.
The following actions may be taken:
• Install the envelope feeder.
• Press Menu until Busy/Waiting displays. Select
one of the following:
- Cancel Job
- Reset Printer
- Reset Active Bin
If the message cannot be cleared, go to
feeder service check" on page
"Internal tray
"Input tray(s)
"Duplex
2-47.
"Envelope
2-49.