Lexmark 632n - T B/W Laser Printer Service Manual page 114

FRU
7 Lines spaced 49.74 mm
(1.958 inch) apart
8 Lines spaced 51.02 mm
(2.009 inch) apart
9 Lines spaced 52.23 mm
(2.056 inch) apart
10 Lines spaced 76.53 mm
(3.013 inch) apart
11 Lines spaced 95.66 mm
(3.766 inch) apart
12 Lines spaced 99.49 mm
(3.917 inch) apart
13 Lines spaced 114.79 mm
(4.519 inch) apart
Action
Replace the FRUs in the following order:
• Redrive assembly
• Fuser assembly
There is a danger from hazardous voltage in the area of
the printer where you are working. Unplug the printer
before you begin, or use caution if the printer must
receive power in order to perform the task.
Replace the transfer roll.
Replace the redrive assembly.
Replace the FRUs in the following order:
• Alignment assembly
• Main drive gearbox assembly
Replace the FRUs in the following order:
• Toner cartridge
• Main drive gearbox assembly
Replace the redrive assembly.
Replace the alignment assembly.
manuals4you.com manuals4you.com
4060-xxx
Diagnostic information
2-81