4060-xxx
Developer drive assembly removal
1.
Remove the inner shield. See
2.
Remove the developer drive assembly mounting screws (A).
3.
Remove the developer drive assembly.
Note: Be sure the developer drive shaft and coupler aligns with the hub on the main drive assembly
when reinstalling the assembly.
Frames removals
EP frame assembly
1.
Remove the left and right side frames. See
frame" on page
2.
Remove the EP frame assembly.
Left side frame
1.
Remove the covers.
2.
Remove the inner shield. See
3.
Remove the main drive assembly. See
4.
Remove the upper front cover hinge assembly. See
removal" on page
5.
Remove the multipurpose tray/lower deflector assembly.
4-20
Service Manual
"Inner shield removal" on page
4-22.
"Inner shield removal" on page
"Main drive assembly removal" on page
4-62.
4-34.
"Left side frame" on page 4-20
4-34.
"Upper front cover hinge assembly
and
"Right side
4-44.