Re-Entering The Server Serial Number And Product Id; Management Tools - HP ML310 - ProLiant - G2 User Manual

The intuitive graphical user interface of the Altiris Deployment Solution console
provides simplified point-and-click, and drag-and-drop operations that enable
you to deploy target servers remotely, perform imaging or scripting functions,
and maintain software images.
For more information about the RDP, refer to the HP ProLiant Essentials Rapid
Deployment Pack CD or refer to the HP website
(http://www.hp.com/servers/rdp).

Re-Entering the Server Serial Number and Product ID

After you replace the system board, you must re-enter the server serial number
and the product ID.
1. During the server startup sequence, press the F9 key to access RBSU.
2. Select the System Options menu.
3. Select Serial Number. The following warning is displayed:
4. Press the Enter key to clear the warning.
5. Enter the serial number and press the Enter key.
6. Select Product ID.
7. Enter the product ID and press the Enter key.
8. Press the Esc key to close the menu.
9. Press the Esc key to exit RBSU.
10. Press the F10 key to confirm exiting RBSU. The server will automatically

Management Tools

List of Tools:
WARNING! WARNING! WARNING! The serial number is loaded
into the system during the manufacturing process and
should NOT be modified. This option should only be used
by qualified service personnel. This value should always
match the serial number sticker located on the chassis.
reboot.
Server Software and Configuration Utilities 67