3. Open the DIMM slot latches.
4. Install the DIMM.
5. Install the access panel ("Removing the Access Panel" on page 22).
Hard Drive Options
The server supports non-hot-plug SCSI hard drives, hot-plug SAS hard drives,
and hot-plug SATA hard drives. Hot-plug SATA hard drives are interchangeable
with hot-plug SAS hard drives when the optional SAS controller ("SAS
Controller" on page 50) is installed.
Hard Drive Model
Non-hot-plug SATA
Non-hot-plug SCSI
Hot-plug SATA/SAS
Hardware Options Installation
Drives Supported
SATA
SCSI
SATA, SAS
Additional Required
Components
N/A
N/A
SAS controller required
for hot-plug SAS hard
drive
43